Helix (Morris) Aquaflash 28
- The Helix Aquaflash 28 was actually a Morris strobe.
- TTL (Nikonos V), Sensor automatic (for Nikonos IV-A), full power and 1/4 power modes.
- Uses an attached sensor to allow automatic flash quench with a Nikonos IV-A.
- Uses 6 "AA" batteries.
- Slave mode.
- Flashes from alkaine set 80 from NiCd 35.
- Recycle time 10 sec alkaline, 6 seconds NiCd.
- Size 4.5 inch by 6 inch, weight 3 lbs.
- ISO 100 guide number 32/16(uw).
- The "28" is listed by HELIX and the Guide number.
- 28mm beam without a diffuser.
Return to strobe page
Visitor count since 2/4/98 
This page last modified